The Smart Sensor Interface 7160 allows force, torque and displacement sensors to be connected through the adapter model 7130 directly to DIGISTANT® 4423 using a 5 pin LEMO connector. Data from the connected sensor are recognized via „Plug & Measure“ connection. Select between two different modes for each measurement. A static measurement over a long measurement period followed by a mean value determination (averaging) will achieve a very high degree of accuracy. With dynamic detection, the measurement of peak values is made possible by a high measurement speed.
The module consists of a high resolution 24 bit A/D converter, a „Flash“ programmable microprocessor with low power consumption and an EEPROM. All specific technical data, e.g. serial numbers and calibration data, as well as the data necessary for calculation, are managed by the microprocessor. The serial output signal from the interface is a simple ASCII-based data stream which can be read by DIGISTANT® model 4423 or by the PC.
Together with the Smart Sensor Interface 7160 and, for instance, a load cell, the DIGISTANT® forms a universal reference measuring chain which can also be supplied with a WKS or DKD calibration certificate.
With a model 7130 adapter, all the pressure modules can also be connected, as well as the Smart Sensor Interface.
Product site 4423
