Variable adjustable optical and acoustical signalling of OK/NOK-parts,
Processor controlled device, up to 8 different operation modes selectable,
OK/NOK-lamp on the front side,
External interlocking,
operation and display

Switch Testing Device DIGISWITCH
5410

Capture and evaluation of switch point, reserve switch point, Testing of up to 5 switches per second, 32 different switch types in 32 measuring programs,  RS232 and PLC interface

Sensor-specific linearization over max. 30 measurement points;
Peak value memory for MIN-, MAX- and peak-to-peak-value;
Fast reaction times (typically 3 ms) for passing of setpoints;
Measuring accuracy 0.1%;
High sample rate (550/sec.);
Display range - 9999 ... 9999

strain gage sensors, potentiometric displacement and angle sensors or standard signals
±10 V

Resolution 14 bit,
sample rate up to 1 kHz;
2 freely configurable inputs
e.g. reset, tare, etc.;
Simple configuration
via RS232 interface;
Mean value, min/max-memory, setpoint values, zeroing via Profibus;
Networking via Profibus DP up to 12 Mbaud possible;
DPV1-mode for parameterizing and backup via Profibus

In-Line Amplifier
9235