|
This new modular
resistance decade system meets a variety
of requirements, either in the
laboratory, in the test field or in the
calibration room. Whether a precision
voltage divider or a series resistance
adjustable in accurately known values is
required - the system offered is the
solution to the problem. The maximum
adjustable resistance is above 100
megohm; the minimum resistance step is
100 milliohm.
|
| Description |
 |
Many years of
experience, proven technology and the use
of tried-out materials, these factors
form the basis of the modular resistance
decade system of the 1440 series. The
system consists of 9 single decades in
the range of 10 x 0.1 Ohm to 10 x
10 MOhm, 2 appropriate housings designed
to accommodate a connection module each
and 4 or 9 decade modules respectively.
Dummy modules serve to fill the empty
space if not all decade modules are
placed in the housing.
An encapsulated switch and the decade
resistors are cast in a plastic housing.
Start and end of each decade as well as
the root of the switch lead to plugs and
terminal sockets respectively. The latter
are according to DIN specification. Each
individual decade module can thus be used
either as an variable resistor or a
voltage divider.
The high-quality stepping switch,
carefully fabricated precision resistors
out of own manufacturing line and proven
technology warrant the desired high
degree of reliability and stability. No
maintenance, no servicing is needed.
|
