The simulator is suitable for calibration laboratory and service-centers which need a computer-controlled resistance decade for the automation of calibration procedures.
Model | 4530 |
Pt100 simulation range |
-200.000 ... 850.000 °C |
Measurement accuracy | 0.02 °C |
Pt200, Pt500, Pt1000 simulation | Yes |
Ni100, Ni1000 simulation | Yes |
Supply voltage | 100 … 240 V, 50 / 60 Hz |
Interfaces |
|
Specific characteristics |
|
The precision RTD simulator is used where measuring instruments or controlling means with high precision must be examined or calibrated. The simulator is suitable for calibration laboratory and service centers which need a computer-controlled resistance decade for the automation of calibration procedures.
All standard platinum and nickel RTD can be simulated with very high accuracy according to scales ITS 90 or IPTS 68.
Temperature regulators, transducers etc. often supply a pulsed signal current in order to reduce the self-heating of the RTD. Devices with electronic simulation of RTD are therefore inclined to swinging and do not function with this application. Here, the advantage of the RTD simulator model 4530 becomes obvious as it can simulate the resistance sensor by real Ohm simulation without problems.
Of course the RTD simulator can be used also as classical resistance decade.
The equipment comes in a sturdy aluminium housing. The keyboard and display are on the front plate. It makes 2-, 3- and 4-wire connection possible at the back side.
Pt100, Pt200, Pt500, Pt1000, Ni100 or Ni1000 can be selected by simple menu navigation. In addition, the selection of temperature scales ITS90 (DIN EN 60751) or IPTS 68 (DIN 43760) and two coefficients α = 0.385 (European) or α = 0.392 (US) is possible. After entry of the characteristic values the input of the temperature levels can be made very simply by the numeric keyboard. Presently set values are indicated in the display.
Relays with low thermovoltage and stable foil resistances with very small temperature coefficients are the heart of the simulator.
Talstr. 1-5
76593 Gernsbach
Germany
Fon: +49 7224645-0
Fax: +49 7224645-88
infoburster.com
www.burster.com
Motek
05.10. -
08.10.21 -
Stuttgart,
70269,
Germany
Please notice that there is a limit of 5 products for the product comparison.
Your latest selection was canceled.
×
burster gmbh & co kg
sensors & precision measurement
Talstr. 1-5
76593 Gernsbach
GERMANY
Contact:
Phone: (+49) 07224-6450
Fax: (+49) 07224-64588
E-Mail:
infoburster.de
The measurement solution.
It‘s with this ambition and for over half a century burster, a global player in the precision measurement technology industry, supplies some of the world’s most recognizable brands with sensors, precision measuring devices and measuring systems for sensor signaling processing. This is all done through our research, development and production headquarters in Germany.
Where quality assurance and production control play a significant role, burster is on board.