8524 Precision tension and compression load cell

compact, uncomplicated, universally applicable, easy integration into existing structures, for static, quasi-static and dynamic tensile and compressive forces, stainless steel, overload stop (option)

  • Features

    • Measuring ranges from 0 ... 500 N to 0 ... 200 kN
    • Measurement accuracy better than 0.25 % F.S.
    • Output signal 1.5 mV/V, standardized
    • Highly versatile and for universal use
    • Type of protection acc. EN 60529 IP67 for measuring ranges ≥ 0 ... 20 kN
    • Linearity error 0.1 % F.S. for measuring ranges ≤ 0 ... 5 kN (option)
    • Cable suitable for drag chains and highly flexible
  • Product data

    Model 8524
    Measuring range

    0 … 500 N
    0 … 1 kN
    0 … 2 kN
    0 … 5 kN
    0 … 10 kN
    0 … 20 kN
    0 … 50 kN
    0 … 100 kN
    0 … 200 kN

    Direction of force Tension and compression
    Standardization Yes
    Signal output 1.5 mV/V
    Protection class

    IP65 for measuring ranges ≤  0 ... 10 kN
    IP67 for measuring ranges ≥ 0 ... 20 kN

    Overload protection Option
    Pull-plate Option
    Load introduction button Option
    Range of operating temperature -30 ... +80 °C
    Specific characteristics
    • Output signal 1.5 mV/V, standardized
    • Highly versatile and for universal use
    • Type of protection acc. EN 60529 IP67 for measuring ranges ≥ 0 ... 20 kN
    • Linearity error 0.1 % F.S. for measuring ranges ≤ 0 ... 5 kN (option)
    • Cable suitable for drag chains and highly flexible
  • Description

    Due to their compact design and construction, these tensionpressure load cells can be operated without any problems in laboratories as well as in industrial environments. Made of corrosion-resistant steel, these load cells can be integrated easily in existing structures, due to their standardized nominal characteristic value and simple assembly. Model 8524 can be used to measure static, semi-static and dynamic tension and compression forces depending on the measurement task.

    Areas of application include:

    • Measurement of press-in and insertion forces
    • Measurement of spring forces
    • Measurement of shearing and cutting forces
    • Force measurement and control during assembly
    • Measurement of pressure on drilling machines

    A load-centering plate mounted on the load cell can be used to measure joint lugs, tension forces in ropes, chains, etc. (refer to page 4: load-centering plate).

    The bending plate inside the load cell is equipped with strain gauges which, on the exertion of a force, supply a bridgeoutput voltage directly proportional to the measurement variable. The center axis of the tension/compression load cells incorporates a continuous thread through which the measurement force is applied free from lateral or torsion force either using a load application button or an applicationspecific adapter part. Starting at a measurement range of 0 ... 5 kN, the measurement accuracy is ideal if the load cell has been mounted on a level, hard and polished base. This condition is not necessary for small measurement ranges of 0 ... 2 kN due to 3 special knife-edge bearings (see dimensional drawing 1). 

    Structural measures should be taken to avoid exposing the load cell to lateral forces (for instance, mounting on movable bearings, levers held by roller bearings). Attachment via the clearance bore holes integrated in the external ring allows simple handling of the sensor. 

    A stop serves as overload protection against damages caused by impermissible high compression forces (option up to measurement range 0 ... 20 kN). Lateral forces of up to 5 % nominal strength only have little influence.

  • Data Sheet & Downloads

    Data sheet
    Operation manual
    Further info
    Flyer / Info
  • Accessories

    pdf Rod ends with internal/external thread for force introduction
  • Videos

    Example showing load cell fitted under pre-load with extreme overload protection

    Youtube channel Burster Youtube Channel

Product Inquiry

    Product comparison

      Discover our new brochure Load cells for production, automation, R&D and quality assurance with many application examples and product focused information!

      Download our new brochure

      © 2019 // burster präzisionsmesstechnik gmbh & co kg