8510 Miniature bending beam tension and compression load cell

Compact, small dimensions, easy installation, for small and extremely small forces, mechanical overload stop

Product Inquiry

    Product comparison

      • Features

        • For tension and compression forces
        • Small measuring ranges from 0 ... 1 N to 0 ... 20 N
        • Mechanical protection against overload to quintuple range
        • Compact size
        • Easy installation
        • Special design upon request
        • burster TEDS optionally available
      • Product data

        Model 8510
        Measuring range

        0 … 1 N
        0 … 2 N
        0 … 5 N
        0 … 10 N
        0 … 20 N

        Direction of force Tension and compression
        Standardization Option
        Signal output 1 mV/V
        Protection class IP20
        Overload protection Yes
        Range of operating temperature -20 ... +80 °C
        Specific characteristics

        • Compact size
        • Easy installation
        • Special design upon request
        • burster TEDS optionally available
      • Description

        The sensor element consists of a double bending beam with applied strain gages.

        Changes in the ohmic resistance of the strain gage fullbridge caused by applied forces are converted into electrical voltages. The precise value (characteristic value) of the output voltage, resulting from the application of a rated force to the sensor, is specified in the accompanying calibration protocol.

        The sensor has to be mounted by two screws on the cable side. The opposite side is meant to receive applied forces (loads).

        Once the rated stress or strain is exceeded by 20 %, further deflection of the bending beam is prevented by an integrated, mechanical stop. This protects the sensor element against permanent deformation.

      • Data Sheet & Downloads

        Data sheet
        Brochure
        Operation manual
        Further info



      burster in Germany

      burster praezisionsmesstechnik gmbh & co kg
      +49 7224645-0
      infoburster.com
      www.burster.com

      Company-Information Company-Information

      Germany

      burster praezisionsmesstechnik gmbh & co kg

      Talstr. 1-5
      76593 Gernsbach
      Germany

      Fon: +49 7224645-0
      Fax: +49 7224645-88
      infoburster.com
      www.burster.com

      Trade fairs

      Wire
      15.04. - 19.04.24 - Düsseldorf, 40474, Germany  

      The Battery Show
      18.06. - 20.06.24 - Stuttgart, 70269, Deutschland  

      ×
      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben