8201N Precision pressure transducer

• Features

  • Measuring ranges from 0 ... 5 bar to 0 ... 1000 bar
  • Accuracy < 0.25 %
  • Output 0 ... 5 V, 0 ... 20 mA or 4 ... 20 mA available
  • For liquid and gaseous media
  • Can be used for dynamic and static measurements
  • Made of stainless steel, reliable, sturdy
  • Standardized output signal to 1.0 mV/V

• Product data

  Model	8201N
  Measuring range	0 … 5 bar 0 … 10 bar 0 … 20 bar 0 … 50 bar 0 … 100 bar 0 … 200 bar 0 … 300 bar 0 … 500 bar 0 … 800 bar 0 … 1000 bar
  Kind of measurement	Against atmospheric pressure
  Signal output	0 … 5 V 0 … 20 mA 4 … 20 mA
  Range of operating temperature	-30 ... +120 °C
  Burst pressure/ -protection	> 100 % over capacity
  Dead volume	5.8 cm3
  Specific characteristics	For liquid and gaseous media Can be used for dynamic and static measurements Made of stainless steel, reliable, sturdy Standardized output signal to 1.0 mV/V USB interface or CANopen

• Description

  Model number 8201 precision pressure sensors are robust, economical, and are available in standard measuring ranges. Their good technical specification and high reliability make them optimum for measuring pressure in all fields of machine construction, process technology, as well as in measurement and control technology.

  The pressure transducers are easy to handle and immune to shock loads and vibrations as they are designed without moving parts.

  All pressure transducers without an internal amplifier have a standardized output signal of 1.0 mV/V. This enables the user to change a transducer in a measuring chain as liked without following readjustment of the electronic.

  Customized designs are available on request.

  Aeras of application are:

  • Hydraulic or pneumatic machines
  • Mechanical engineering
  • Plant control and monitoring

  The measuring element of the precision pressure transducer consists of a diaphragm. On its reverse side a strain gauge rosette is applied, which is an assembly of 4 active strain gauges arranged in a bridge circuit. The pressure is measured against atmosphere, that means the space behind the diaphragm is connected to the surrounding atmosphere (relative) via a small outlet in the housing.

  Each transducer is available with an internal amplifier, a socalled pressure transmitter, with voltage or current output. The input of the internal amplifier is immune against polarity reversal and the output is immune against over-voltage. 

• Data Sheet & Downloads

  Data sheet

  8201_N

  DEEN

  Operation manual

  8201

  DE

Related products

9250

DigiVision

SENSORMASTER 9163

9180

DIGIFORCE® 9311