8435 Miniature tension and compression load cell

Compact, small dimensions, accurate, low-priced, easy assembling into  existing structures, for static and dynamic measurements, stainless steel

  • Features

    • Measuring ranges from 0 ... 200 N to 0 ... 5 kN
    • Small dimensions
    • Simple mounting
    • Made of stainless steel
    • For tension and compression forces
  • Product data

    Model 8435
    Measuring range

    0 … 200 N
    0 … 500 N
    0 … 1000 N
    0 … 2000 N
    0 … 5000 N

    Direction of force Tension and compression
    Standardization Option
    Signal output 1 mV/V
    Protection class IP54
    Pull-plate Option
    Load introduction button Option
    Range of operating temperature -30 ... +80 °C
    Specific characteristics
    • Small dimensions
    • Simple mounting
    • Made of stainless steel
    • For tension and compression forces
  • Description

    This miniature tension and compression load cell is designed as a compact and universal sensor, which provides a high level of precision at a low price.

    Made of stainless steel, the sensor has small dimensions and allows easy assembly in existing structures where static and dynamic forces need to be measured.

    This load cell is typically used for measuring forces, weights, coefficients of friction, sliding friction and adhesion on


    • fitting devices
    • handling gear
    • coupling mechanisms
    • loading machines and
    • operating devices.

    A load-centering plate is offered as an accessory for simple installation of the load cell in a girder assembly.

    This model of load cell uses proven strain gauge technology to perform measurements. Strain gauges are applied to the sensitive element and connected to form a full bridge. The electrical resistance of this full bridge increases with the load acting on it, so that the bridge supplies an output voltage proportional to the measurement variable.

    This model allows the force application of two kinds: compression via the load application button and tension via the centric internal thread. The measurement range of 0 ... 5000 N is supplied exclusively with the integrated load application button. The sensor has to be mounted on a level surface using screws fitted through the three bore holes in the outer ring.

    To achieve the highest possible measurement accuracy, the sensor should not be subject to lateral forces. A strain-relief and an anti-bend mechanism for the connection cable are integrated in the sensor housing.

  • Data Sheet & Downloads

    Data sheet
    Operation manual
    Further info


Lösungen Bild


Aerospace Industry
Railway Industry

Product Inquiry

    Product comparison

      Amplifier module 9250
      Bus controller 9251

      • Outstanding system with up to 8 modules, expandable fieldbus interface via the bus controller
      • Supports Ethernet based fieldbuses as PROFINET, EtherCAT, EtherNet/IP or I/O interface

      Discover the universal diversity of this innovation ...

      © 2018 // burster präzisionsmesstechnik gmbh & co kg