Factory Calibration Certificate Factory Calibration

• Product data

  Model	WKS
  Load cell or measurment chain	Measuring range: 0 N ... 10 kN  Uncertainty: 0.1 % rdg. Measuring range: > 10 kN ... 200 kN  Uncertainty: 0.1 % F.S. Measuring range: > 200 kN ... 2 MN with external partners
  Torque sensor or measurement chain	Measuring range: 0.05 ... 250 Nm  Uncertainty: 0.12 % rdg. Measuring range: 250 Nm ... 5 kNm with external partners
  Pressure sensors or measurement chain (absolute pressure)	Measuring range: 0.1 ... 35 bar  Uncertainty: 0.04 % rdg. (but not less than 60 μbar) Measuring range: 35 ... 1400 bar with external partners
  Pressure sensor or measurement chain (excess pressure)	Measuring range: 0 ... 1400 bar  Uncertainty: 0.04 % rdg. (but not less than 60 μbar) Measuring range: 1400 ... 5000 bar with external partners
  Displacement sensor or measurement chain	Measuring range: 0 ... 100 mm  Uncertainty: U(L) = (0.5+L/150+0.04*L) μm Measuring range: 100 ... 300 mm with external partners
  DC voltage	Measuring range // smallest readable uncertainty 10 μV ... 200 V // (5 + 0.2 V/U) * 10-6   1 V // 2 * 10-6 1.02 V // 2 * 10-6 10 V // 2 * 10-6
  DC current	Measuring range// smallest readable uncertainty 1 μA ... 100 mA // 10 * 10-6 > 100 mA bis 1 A // 20 * 10-6 > 1 A bis 10 A // 50 * 10-6 > 10 A bis 500 A // 10 * 10-5 Above 30 A, only calibration of current sources, not of ammeteres
  DC resistance	Measuring range // smallest readable uncertainty 0.1 mΩ ... < 1 mΩ // 50 * 10-6 1 mΩ ... < 10 Ω // 10 * 10-6 10 Ω ... 100 kΩ // 5 * 10-6 > 100 kΩ ... 1 MΩ // 10 * 10-5

• Description

  The burster factory calibration certificate includes the following services:

  1. Assessing whether your measuring equipment is suitable for calibration.
  2. Performing a calibration.
  3. Documentation in the form of a factory calibration certificate.
  4. Identifying calibrated items with a calibration label.

  If we find during our calibration-suitability check that an adjustment is needed, we perform this adjustment prior to calibration in close consultation with you.

• Data Sheet & Downloads

  Further info

  Efficient, economical calibration with the burster factory calibration

  DE

• FAQ

  1. Which products can burster calibrate?
     burster can calibrate and adjust all burster products. Calibration and adjustment of all sensors is performed either in burster laboratory or at a partner facility.
     Additionally, burster can calibrate sensors and equipment from other manufacturers after coordinating technical details.
  2. How long does a calibration take?
     Typically, a standard calibration takes 1 to 2 weeks after the test items are received and pending technical questions are resolved.
  3. What does a calibration involve?
     Every product is subject to an assessment of suitability for calibration prior to its calibration. If we find out that adjustments are needed, we contact you and after you go-ahead, we make the necessary adjustments and then repeat the calibration. All calibrations are performed in accordance with internationally standardized methods. 
  4. What quality standards are met by a factory calibration (WKS)?
     With a burster factory calibration you can be confident of compliance with all the quality systems used in the automotive, aerospace, pharmaceutical, medical and defence industries, such as ISO 9001, ISO 16494, ISO 13485, ISO 10012.
  5. What is "suitability for calibration"?
     When you send burster a product for calibration, we check prior to the actual calibration, that your unit is working properly electrically.
  6. What is the difference between calibration and adjustment?
     Calibration establishes the measurement range and accuracy of your instrument or test equipment. If it is found during calibration, that the measurement ranges or accuracy can no longer meet the product specifications guaranteed by burster, then it may be possible to adjust a unit so that it complies again with the promised specification.

• LINKS & DATA

  <link _blank internen link in neuem>Download test and calibration certificates

  <link internal-link internen link im aktuellen>burster WKS Calibration