8451, 8552 Presses load cell for hand and automatic operated presses

Simple mounting on press stamps, compact and very robust construction, hermetically sealed model, suitable for all standard manual presses with stamp borings of 10 H7 resp. 20 H7, adaptation to right and left handed users possible.

Product Inquiry

    Product comparison

      • Features

        • Measuring ranges from 0 ... 500 N up to 0 ... 100 kN
        • Measurement range up to 25 kN with mechanical overload protection
        • Simplest mounting on press ram
        • Compact and very robust construction
        • Suitable for all standard manual presses with stamp holes of 8 H7 resp. 20 H7
        • Choice of diameter for pin and hole
        • burster TEDS optionally available
      • Product data

        Model 8451, 8552
        Measuring range

        8451
        0 … 500 N
        0 … 1 kN
        0 … 2 kN
        0 … 5 kN
        0 … 10 kN
        0 … 20 kN
        0 … 50 kN
        0 … 100 kN

        8552
        0 … 100 N
        0 … 250 N
        0 … 500 N
        0 … 1 kN
        0 … 2,5 kN
        0 … 5 kN
        0 … 10 kN
        0 … 25 kN

        Direction of force Compression
        Standardization Option
        Signal output

        8451
        0.35 mV/V
        0.7 mV/V
        0.9 mV/V
        Depending on measuring range!

        8552
        Nominal sensitivity
        Mounted connector model 9900-V245 for ForceMaster 9110
        Standardized sensitivity 0.8 mV/V

        Protection class

        8451
        IP67

        8552
        IP65

        Overload protection Yes
        Diameter for pin

        8451
        Standard
        8552
        8 mm
        10 mm
        12 mm
        15 mm
        16 mm

        Diameter for hole

        8451
        Standard
        8552
        8 mm
        10 mm
        12 mm
        15 mm
        16 mm

        Pull-plate No
        Load introduction button No
        Range of operating temperature

        8451
        -20 °C ... +80 °C

        8552
        0 °C ... +70 °C

        Specific characteristics

        8451

        • Measurement precision of 0.5 % of full scale for small measurement ranges
        • Rugged construction, works even under transverse forces
        • Protection class IP67
        • burster TEDS optionally available

        8552

        • Short, compact design
        • Pin/hole diameter from 8 mm to 16 mm
        • Mechanical overload protection for all measurement ranges
        • Choice of diameter for pin and hole
        • burster TEDS optionally available

         

      • Description

        Load cell models 8451 and 8552 have been developed for measuring the forces that occur during press operation. The internal measuring elements have a rugged design, which mean they can cope reliably with the steep force curves that are typical of press applications. They can be fitted or replaced quickly and easily on the press ram without the need for additional components around them. With a compact overall height of just 50 mm, the load cell is placed between tool and press ram and can therefore measure the actual compression force directly in the axis of operation.

        Typical applications include:

        • Forces in component joining
        • Press-fitting
        • Bending forces during material deformation
        • Cutting forces when severing material
        • Forces during stamping processes
        • Punching forces for blanks
        • Break-out forces used in destructive testing

        The load cell measures the compression forces between the circular contact surfaces of plunger and tool. The pin on its top side and hole on its lower face are simply provided for mechanical fixing and centering the components correctly. To provide as large a range of mechanical compatibility as possible, the pins/holes are available in different diameters. The connecting cables are designed like robot cables to allow frequent movement and are fixed securely to the sensor housing. Attachments are available which clamp onto the press sensors to enable easy mounting of displacement sensors according to the circumstances of use.

        8451

        • Measurement precision of 0.5 % of full scale for small measurement ranges
        • Rugged construction, works even under transverse forces
        • Protection class IP67

        8552

        • Short, compact design
        • Pin/hole diameter from 8 mm to 16 mm
        • Mechanical overload protection for all measurement ranges
        • Choice of diameter for pin and hole
      • Data Sheet & Downloads

        Data sheet
        Brochure
        Operation manual
        Further info
      • Videos

        How to do: Attach force and displacement sensor to a hand lever press
        ForceMaster 9110 - Low-cost hand lever presses monitoring

        Youtube channel Burster Youtube Channel




      burster in Germany

      burster praezisionsmesstechnik gmbh & co kg
      +49 7224645-0
      infoburster.com
      www.burster.com

      Company-Information Company-Information

      Germany

      burster praezisionsmesstechnik gmbh & co kg

      Talstr. 1-5
      76593 Gernsbach
      Germany

      Fon: +49 7224645-0
      Fax: +49 7224645-88
      infoburster.com
      www.burster.com

      Trade fairs

      The Battery Show
      30.11. - 02.12.21 - Stuttgart, 70269, Germany  

      ×
      © 2021 // burster präzisionsmesstechnik gmbh & co kg
      nach oben