8821 Incremental angle of rotation / rotary speed sensor

• Features

  Rotary speed sensor / Angular displacement sensor

  • Supply voltage 10 ... 30 V DC
  • Degree of protection IP65, all-around
  • Robust
  • High resistance to interference

  Rotary speed sensor

  • 60 pulses/turn (standard)
  • Max. 8000 rpm

  Angular displacement sensor

  • Up to 3600 pulses/turn
  • Detection of rotation direction (channels A and B)
  • Reference pulse (channel N)

  Special versions on request
  (higher pulse rate, TTL output etc.)

• Product data

  Model	8821
  Principle	Incremental
  Measuring range	Rotary speed sensor: 60 pulses/turn (standard) Angular displacement sensor: up to 3600 pulses/turn
  Signal output	H > 2.5V - L < 2.5V
  Protection class	IP65
  Range of operating temperature	-10 ... +70 °C
  Supply voltage	10 … 30 V DC
  Electrical connection	PG screwing with screened PVC cable
  Continuous rotation possible	Yes
  Displacement speed	8000 U/min
  Specific characteristics	Degree of protection IP65, all-around Robust High resistance to interference Rotary speed sensor: 60 pulses/turn (standard) Angular displacement sensor: up to 3600 pulses/turn Detection of rotation direction (channels A and B) Reference pulse (channel N) Special versions on request (higher pulse rate, TTL output etc.)

• Description

  Incremental rotation sensors are used wherever displacement, positions or speeds have to be measured accurately.
  
  They are therefore important interfaces between the mechanical and electronic parts of a machine.

  Mechanically robust, electrically reliable and resistant to extreme ambient conditions; these are the outstanding properties offered by this sensor.

  Typical applications include:

  • Machine tools
  • Wood and plastic machining
  • Textile machines
  • Lifts
  • Door systems
  • Paper machines
  • Drive equipment
  • Assembly and handling equipment
  • Packaging machines
  • Scales
  • Test machines
  • Conveying equipment
  • Doors and gates

  Description Rotary speed sensor

  Model 8821 rotation sensor generates rectangular electrical pulses when the shaft is turned. An encoder disk is coupled to the shaft which is carried on 2 ball bearings. The light from an infrared diode passes through the encoder disk and the diaphragm disk (which is only present on the angle sensors).
  
  The signals picked up by light-sensitive sensors are processed to yield rectangular signals.
  
  The aperture disk generates an offset in the pulse sequences (only on angle sensors).

  Description Angular displacement sensor

  The rectangular pulses are output from channels A and B with a displacement of a quarter of a pulse (90°). This displacement allows the evaluation electronics to detect the direction of rotation. Electrical faults and vibrations do not lead to incorrect counts.An early warning output indicates that the light intensity is weakening. After this, the sensor can still be operated for some thousands of hours before it fails.A reference pulse, N, is also output. This is a single pulse for each rotation.

• Data Sheet & Downloads

  Data sheet

  8821

  DEENPL