Measurement of mechanical values

at a completely automated motor vehicle test bed

  • High accuracy
  • Rapid measuring value collection
  • Configuration via PROFIBUS 

TASK

On a completely automated test bed motor vehicle seats should be checked for their encumbrance. The following features should be tested and recorded:

  • Adjusting angle of the back
  • Torque required for turning handle
  • Total weight of the seat (with and without dummy)
  • End position determination

In order to be able to make a well defined statement about the categorization of the motor vehicle seat, the measurement data must be recorded and networked and deposited together as test result on the PROFIBUS level.

SPECIFIC REQUIREMENT

All test data should be transferred at the same time for storage, in order to obtain relevant samples of information for comparative logging of this test. A tare function is a consideration for mounted sensors addressing the issue concerning initial load (dummy load).

SOLUTION

For the recording of all mechanical values following sensors are used:

  • Adjusting angle of the back → angular displacement sensor model 8820
  • Torque of the turning handle → torque sensor model 8661
  • Total weight of the seat → 2 load cells model 8526
  • End position determination → displacement sensor model 8719

All sensor signals are recorded by 4 individual Sensor Profibus Modules 9221. Concomitantly the modules display the sensors with voltage and evaluate their signals. The transferring of measurement data takes place in parallel via PROFIBUS. The tare activation concerning a possible initial load, which can be modelled as a dummy, takes place directly via simple PLC unit communication, over PROFIBUS.

Go to product 9221
Go to product 8661
Go to product 8820
Go to product 8526
Go to product 8710, 8711

Sectors

Downloads

Applications
burster in Germany

burster praezisionsmesstechnik gmbh & co kg
+49 7224645-0
infoburster.com
www.burster.com

Company-Information Company-Information

Germany

burster praezisionsmesstechnik gmbh & co kg

Talstr. 1-5
76593 Gernsbach
Germany

Fon: +49 7224645-0
Fax: +49 7224645-88
infoburster.com
www.burster.com

Trade fairs

Wire
15.04. - 19.04.24 - Düsseldorf, 40474, Germany  

The Battery Show
18.06. - 20.06.24 - Stuttgart, 70269, Deutschland  

×

Product Inquiry

    Product comparison

      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben