Torque measurements

using a dual-range sensor in a test setup

  • Extremely fine 0.09° angular resolution
  • Axial load
  • Bidirectional torque measurement
  • Rugged design
  • Sampling rate up to 1 kHz


The task is to measure the static and dynamic torques in a test setup for a fan. An 8661 torque sensor, and specifically the dual-range model, was selected for the task, because not only can it measure the torque of the rotor drive in widely-spaced ranges at two speed levels but it can also provide extremely accurate readings.


  • Static and dynamic torque measurements
  • High angular resolution
  • Rugged design using durable and low-friction sensor bearings
  • High sampling rate because of the different operating states
  • Precise measurement of clockwise and anticlockwise torque


The 8661 torque sensor measures the rotating and static torque at two positions. A torque/speed/power calculation is performed for the rotating torque. The optional USB interface can be used with the application-oriented DigiVision software for analysing the measurements. 
The reactive torque and rotational angle are measured for the static torque. The dual-range model of the 8661 torque sensor is available with a choice of range factors (1:4, 1:5 and 1:10) or a custom factor. Dual-range sensors allow measurements in an additional measurement range which is narrower but has high measurement accuracy.

Go to product 8661
Go to product DigiVision



burster in Germany

burster praezisionsmesstechnik gmbh & co kg
+49 7224645-0

Company-Information Company-Information


burster praezisionsmesstechnik gmbh & co kg

Talstr. 1-5
76593 Gernsbach

Fon: +49 7224645-0
Fax: +49 7224645-88

Trade fairs

SPS - Smart Production Solutions
12.11. - 14.11.24 - Nürnberg, 90471, Germany  


Product Inquiry

    Product comparison

      © 2024 // burster präzisionsmesstechnik gmbh & co kg
      nach oben