8627 Torque sensor

Robust, reliable, easy handling, highly accurate, extremely compact design, for static and dynamic measurement (non-rotating)

  • Features

    • Measurement range from 0 ... 500 Nm to 0 ... 5000 Nm
    • Linearity error 0.1 % F.S.
    • Reliable and durable
    • Simple handling and assembly
    • Output signal standardized
    • Optional linearity error 0.05 % F.S.
    • Optional with burster TEDS
  • Product data

    Model 8627
    Principle Non-rotating
    Measuring range

    0 … ± 500 Nm
    0 … ± 1000 Nm
    0 … ± 2000 Nm
    0 … ± 5000 Nm

    Signal output

    0.5 mV/V
    1 mV/V
    depending on measuring range

    Mechanical connection

    Both ends with flag

    Electrical connection

    6 pins plug connection

    Protection class IP50
    Range of operating temperature -15 ... +55 °C
    Specific characteristics
    • Reliable and durable
    • Simple handling and assembly
    • Output signal standardized
    • Different mechanical versions
    • Special versions and higher measurement ranges on request
    • Optional linearity error 0.05 % F.S.
  • Description

    This torque sensor is qualified for static and dynamic measurements on non-rotary applications.

    Further the measurement of reaction torques on rotating machine parts is possible. Especially the torque sensors with flanges are preferred. They are mounted between motor and stator, e.g. in agitator drives. This enables a maintenancefree torque measurement. 

    For individual measuring tasks the design of our torque sensors can be adapted to the customer’s installation conditions.

    More application examples:

    • Test structures in the field of precision mechanics
    • Determination of friction torques
    • Acquisition of breakage moments on screw caps

    The design has been optimized regarding overall length, weight and volume, so that axial forces up to relatively high limit values and bending moments of up to 20 % of the measuring range have only a small effect to the influence of the measuring element. Four metal film strain gauges are mounted on the measuring element and connected to form a full bridge. When applying AC or DC voltage on the bridge, the mechanical value torque is converted into electrical voltage. The necessary amplifier either delivers a norm signal (0 … 10 V, 0/4 … 20 mA) or – with indicator module – a torque signal truly corresponding to the measured variable.

    The sensor output signal is standardized, so that an exchange of the sensor (spare part) does not require any new adjustment of the measuring chain.

    The option burster TEDS (electronic data sheet, programmed memory chip) allows a quick configuration of compatible sensor electronics. 

  • Data Sheet & Downloads

    Data sheet
    Brochure
    Operation manual
    Further info



Solutions

Lösungen Bild

Sectors

Biotechnology
Chemical Industry
Food Industry
Machine Manufacturers
Others
Plastics Industry
Utility Vehicles

Product Inquiry

    Product comparison

      Discover our new brochure Load cells for production, automation, R&D and quality assurance with many application examples and product focused information!

      Download our new brochure

      © 2019 // burster präzisionsmesstechnik gmbh & co kg
      nach