Molto compatta, piccole dimensioni, robusta, solida, affidabile, universale, realizzata in acciaio inossidabile
Please notice that there is a limit of 5 products for the product comparison.
Your latest selection was canceled.
×Model | 8402 |
Measuring range |
0 … 1 kN |
Direction of force | Compression |
Standardization | Yes |
Signal output | 1.5 mV/V |
Protection class | IP54 |
Overload protection | No |
Pull-plate | No |
Load introduction button | No |
Range of operating temperature | -30 ... +100 °C |
Specific characteristics |
|
This, related to its measuring range, miniaturized load cell enables an universal and reliable operation in industries and laboratories. It is well suited for compression measurements in very restricted structures. The load cell is a compact construction and made of superrefined steel. Therefore it can be used in many fields of industry, like.
Examples are:
Thanks to the rounded top, in shape of a little hat, the force to be measured is led into the sensor centrically and free of lateral force.
Strain gauges arranged in a full bridge are applied on the generated surface of the sensor. By applying a force to the strain gauge bridge the resistance change of the strain gauges is transformed into an output voltage which is directly proportional to the measured force.
The load cells have to be mounted on a smooth, plane parallel surface. They can be fixed with contact glue or silicone. To receive an adequate measurement accuracy neither transversal nor lateral forces have to influence the load cell.
Clamp forces acting laterally on the load cell have to be avoided. During installation or mounting you have to take care that the cable outlet and the cable of the load cell are not stressed by tension and bending forces.
The output signal of the connecting plug is 1.5 mV/V, so that a parallel connection or an exchange can easily be done, without the need to re-adjust the processing electronics.
Example showing load cell fitted under pre-load with extreme overload protection
Via Repubblica, 10
24035 Curno
Italy
Fon: +39/035/618120
Fax: +39 035618250
infoburster.it
www.burster.it
burster präzisionsmesstechnik
gmbh & co kg
Talstraße 1-5
76593 Gernsbach
DEUTSCHLAND
Kontakt:
Telefon: (+49) 07224-6450
Telefax: (+49) 07224-64588
E-Mail:
infoburster.de
Messtechnisch die Lösung.
Mit diesem Anspruch beliefert das international agierende Messtechnik-Unternehmen burster seit mehr als einem halben Jahrhundert vom Entwicklungs- und Produktionsstandort Deutschland namhafte Kunden in der ganzen Welt mit Sensoren, Präzisionsmessgeräten und Messsystemen zur Sensorsignalverarbeitung.
Wo Qualitätssicherung und Produktions-Überwachung eine Rolle spielen,
ist burster mit dabei.