Dispositivo di prova, simulatore di strain gauge, test del sensore, catena di miusra campione
Please notice that there is a limit of 5 products for the product comparison.
Your latest selection was canceled.
×
Model | 7281 |
Measurement accuracy | < ± 0.001 % F.S. |
Sample rate |
0.1 … 1200/s (DC) |
Type of sensor |
|
Interfaces | USB 2.0 |
Sensor excitation |
Strain gauge:
Potentiometer:
Transmitter:
|
Protection class | IP40 |
Supply voltage | 10 ... 28 VDC |
Reference measurement device | Yes |
Sensor test | Yes |
Device test | Yes |
Strain gauge simulator | Yes |
Data logger | Yes |
Electronic sensor data sheet | Yes |
Connection type | 4 / 6 wire connection |
Measurement programs | 16 |
Specific characteristics |
|
The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results.
If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.
The instrument is used in metrology institutes, calibration laboratories and in industry in the fields of quality assurance, facility commissioning and system monitoring.
Areas of use:
The TRANS CAL 7281 can be fitted with standard or rechargeable batteries for portable use or can run from an external power supply. Combined with a reference sensor the testing device provides a high-precision reference measurement chain e.g. for force measurements, but is also ideal for service engineers as a tool for locating faults in device or sensors.
The choice of sensors includes strain gauge, normalizedsignal ± 5 V / ± 10 V and potentiometric sensors. The LCD graphics display shows the live measurement value and the corresponding bar indicator. It also supports display functions such as data-logger, tared value in % and upper/lower limit for the comparator with simultaneous indicator (< = >) of the evaluation result.
For routine testing and also fault-locating tasks, the tester makes it really simple to measure isolation resistances and input/output resistances. The equipment test function is a quick and easy way to verify that the display device complies with the characteristic value, offering strain-gage simulation of up to ± 50 mV/V or output of a normalized signal of up to 10 V. German-accredited DKD/DAkkS calibration certificates or factory calibration certificates are optionally available. The DigiCal configuration and data-acquisition software provides useful display and reporting functions.
Motek exhibition video burster 2015
burster Calibration to go Control 2015
Via Repubblica, 10
24035 Curno
Italy
Fon: +39/035/618120
Fax: +39 035618250
infoburster.it
www.burster.it
burster präzisionsmesstechnik
gmbh & co kg
Talstraße 1-5
76593 Gernsbach
DEUTSCHLAND
Kontakt:
Telefon: (+49) 07224-6450
Telefax: (+49) 07224-64588
E-Mail:
infoburster.de
Messtechnisch die Lösung.
Mit diesem Anspruch beliefert das international agierende Messtechnik-Unternehmen burster seit mehr als einem halben Jahrhundert vom Entwicklungs- und Produktionsstandort Deutschland namhafte Kunden in der ganzen Welt mit Sensoren, Präzisionsmessgeräten und Messsystemen zur Sensorsignalverarbeitung.
Wo Qualitätssicherung und Produktions-Überwachung eine Rolle spielen,
ist burster mit dabei.