1427Computer-controlled high-precision resistor decade
Maximum precision and stability! Error of tolerance of only 0.005 % and a temperature coefficient < 1 ppm/K guarantee maximum accuracy. Developed for the simulation of RTD (Pt, Ni) with an Error of tolerance of 0.02 °C. Communication via RS232, optionally also IEEE488 - perfect for demanding measuring and calibration tasks.
Productinformation
| Resistance range |
|
| Tolerance |
|
| Temperature coefficient |
|
| Storage stability |
|
| Power |
|
| Range of operating temperature |
|
| Interfaces |
|
| Specific characteristics |
|
Pt100, Pt200, Pt500, Pt1000, Ni 100 and Ni 1000 sensors in the range from -200 °C to +850 °C can be selected as temperature simulators. The temperature is entered via the keypad or the data interface. The according resistance appears at the output sockets in two-, three- or four-wire technology.
The resistance decade allows direct selection of resistances between 1 Ω and 1.2 MΩ. The resolution can be selected down to 0.00001 Ω, depending on the ohm value. The selected resistance can be taken in two- or four-wire technology.
An LCD display provides information about the selected resistance or temperature, the sensor type and the control status.
Extras
Calibrate
Customised and tailored to the diverse requirements placed on quality systems in your industry.
Compensation
We ensure that the output signal corresponds to its specified value in the unloaded state and at nominal load.
Implementation
We support you with on-site implementation so that you can start production quickly and reliably.
Repair
Does your burster product need to be repaired? We'll make sure it works again quickly and easily.