8451Press load cell for manually operated and automatic presses

Easy installation on the press ram - quick and uncomplicated! Compact, extremely robust and hermetically closed for maximum durability. Suitable for all standard hand lever presses with ram bore 10 H7 or 20 H7. Flexible adaptation possible for right and left-handed users.

Data sheet download To the CAD data

Add to watch list

Productinformation

Measuring range	0 ... 500 N 0 ... 1 kN 0 ... 2 kN 0 ... 5 kN 0 ... 10 kN 0 ... 20 kN 0 ... 50 kN 0 ... 100 kN
Direction of force	Compression
Standardization	Optional
Signal output	0.35 mV/V 0.7 mV/V 1.0 mV/V 1.2 mV/V 1.5 mV/V Depending on measuring range
Protection class	IP67
Overload protection	Yes
Diameter for pin	Standard
Diameter for hole	Standard
Pull-plate	No
Load introduction button	No
Range of operating temperature	-20 °C ... +80 °C
Specific characteristics	Measuring ranges from 0 ... 500 N to 0 ... 100 kN Linearity deviation ≤ ±0.25 % F.S. Protection class IP65 / IP67 Simple installation on the press ram Stable design with mechanical overload protection

8451
DE EN

Load cells for production, automation, development and quality assurance
DE EN
100 % press-in monitoring at manual workstations
DE EN

8451
DE EN

Process-monitored manual presses - retrofitting
DE
Strength experts
DE EN

The model 8451 load cell was developed to measure the working forces that occur on presses. The internal measuring elements are designed to be robust, so that the typical press applications with their steeply rising force curves can be safely mastered. They can be quickly and easily attached to the press ram or replaced without any additional surrounding components. The load cell is placed between the mould and the press ram and can therefore measure the actual compressive force directly in the working axis.

The load cell measures the compressive forces between the circular contact surfaces between the press ram and the press tool. The pin on its upper side and the hole on its underside are only used for mechanical mounting and to ensure that the components are centred in relation to each other. The connection cables are suitable for drag chains, designed for a wide range of flexible movements and are securely fastened in the Mounting in the sensor housing. Clampable mounting parts are available for the press sensors to facilitate the mounting of displacement sensors for individual applications.

Comes in a range of peg and hole diameters
Standard tool holder, suitable for retrofitting
5-fold protection in event of temporary static overloads
Protected against ingress of coolant or lubricant

Task

A ball bearing needs to be press-fitted into a component. Load cell 8552 is used to verify that the bearing has been fitted with the correct force. The sensor can be fitted easily between tool and press ram using a standard tool holder. A visual and acoustic signal from the ForceMaster 9110 is used to indicate that the maximum force has been reached. The load cell is equipped with burster TEDS, so that sensor settings can be imported into the ForceMaster 9110 without any laborious configuration.

Watch our How-to-do video at: <link http: www.youtube.com burstervideo _blank external link in new>www.youtube.com/bursterVideo