8227Pressure transmitter

Robust, contact-safe and extremely economical! Made of stainless steel and with a stainless steel measuring element, this sensor is particularly resistant - perfect for liquid and gaseous media as well as the harshest enviriomental conditions. In addition, the measurement signal always remains precise regardless of the installation position.

Data sheet download To the CAD data

Add to watch list

drucktransmitter 8227 burster pressure transmitter

Productinformation

Measuring range	0 ... 0.05 bar 0 ... 0.1 bar 0 ... 0.25 bar 0 ... 0.5 bar 0 ... 1 bar 0 ... 2 bar 0 ... 5 bar 0 ... 10 bar 0 ... 20 bar 0 ... 30 bar 0 ... 50 bar 0 ... 100 bar 0 ... 200 bar 0 ... 350 bar 0 ... 500 bar
Kind of measurement	Measurement against atmosphere
Signal output	0 ... 10 V 0 ... 5 V 4 ... 20 mA
Range of operating temperature	-40 ... +105 °C
Burst pressure/ -protection	300 % over capacity
Dead volume	0.5 cm³
Specific characteristics	Measuring ranges from 0.05 bar ... 500 bar For liquid and gaseous media For static and dynamic measurements Absolute measuring option Particularly economical

8227
DE EN

Equipped with a robust cabinet and a stainless steel measuring element, the sensor is particularly resistant and suitable for the harshest enviriomental conditions; even the installation position has no influence on the measurement signal. The integrated measuring amplifier converts the measurement signals directly into interference-free voltage signals or current signals that can be transmitted over longer distances. An M12 x 1 flush-mounted diaphragm is available for highly viscous substances, thus eliminating interfering dead volume.

To measure the ambient pressure (relative kind of measurement), there is a small protected opening on the back of the sensor. With the absolute measuring option, the applied compression is measured against an enclosed vacuum.

A DIN 43650A valve connector or an M12 x 1, 4-pin connection is available for electrical connection.