8631Precision torque sensor

Robust, reliable and easy to use! With an extremely compact design and high accuracy, ideal for static and quasi-static applications (non-rotating). The through-hole (Ø 10 mm) allows cabel ends, Bowden cables or other components to be routed through the sensor.

Data sheet download To the CAD data

Add to watch list

Productinformation

Principle	Non-rotating
Measuring range	0 ... ±5 N·m 0 ... ±10 N·m 0 ... ±20 N·m 0 ... ±50 N·m 0 ... ±100 N·m 0 ... ±200 N·m 0 ... ±300 N·m 0 ... ±400 N·m 0 ... ±500 N·m 0 ... ±800 N·m 0 ... ±1000 N·m
Signal output	0 ... ±10 V incl. USB configuration 0 ... ±10 V incl. USB configuring and measuring Standardised output signal (mV/V) Standardised output signal (mV/V) with TEDS
Electrical connection	7-pin, Micro-USB (option)
Protection class	IP40
Range of operating temperature	-20 °C ... +80 °C with integrated amplifier/USB -20 °C ... +60 °C
Specific characteristics	Standardised output signal Except for compact design

8631
DE EN

Torque sensors for production, automation, development and quality assurance
DE EN

8631
DE EN
DigiVision Anliegend
DE EN

DigiVision
DE EN
Version information DigiVision
DE EN
About DigiVision
DE EN

Overview of torque sensors
DE EN

This high-precision torque sensor is designed for static and dynamic measurements in non-rotating applications. The through-hole with a diameter of 10 mm allows cabel ends, floor pulls or other components to be routed through the sensor.

The mounting flange is provided with threaded holes and through holes, making installation of the sensor possible from both sides. Non-rotating parts ensure maintenance-free operation when used properly.

Thanks to its modular design, the strain gauge-based sensor can be configured precisely for the desired application:

With the integrated amplifier option, the sensor directly supplies a voltage signal proportional to the torque from 0 ... ±10 V. The sensor can be configured via the micro-USB interface, e.g. setting a filter frequency, averaging and a tare function are available. With the USB option, in addition to the voltage output, the measuring function is also available via USB. Measurement and data storage can be carried out using the DigiVision software supplied; in addition, drivers are available for LabVIEW, for example. Integration into your own programmes using DLL is also possible. You can find examples of this on our website www.burster.de

With the burster TEDS option (electronic data sheet, memory chip with the sensor-specific sensitivities), quick configuration of compatible evaluation units (measuring amplifiers, indicators ...) is possible.