8675Precision flange torque sensor

Non-contact flange torque sensor - precise, compact and easy to integrate! Measuring ranges from 100 N·m to 5000 N·m with a low linearity deviation of ≤ ±0.1 % F.S.. Flexible output signal: 0 ... ±10 V / RS 422 / USB. Can be easily integrated into existing systems thanks to its ringless design and extremely compact dimensions. Flange dimensions according to DIN standard for maximum compatibility.

Data sheet download Data sheet download To the CAD data

Add to watch list

Productinformation

Principle	Rotating
Measuring range	0 ... ±100 N·m 0 ... ±200 N·m 0 ... ±500 N·m 0 ... ±1000 N·m 0 ... ±2000 N·m 0 ... ±3000 N·m 0 ... ±5000 N·m
Signal output	Frequency output (RS422): 60±20 kHz Analogue output: 0 - 5 V, 0 - 10 V, ±5 V, ±10 V
Ratio	no multiple range
Mechanical connection	Flange/flange
Electrical connection	12-pin Connector; USB
Protection class	IP54
Range of operating temperature	-20 ... +85 °C
Max. rotary speed	Depending on measuring range 15 000 - 21 000 1/min
Signal transmission	Non-contact, optical

8675
DE EN
8675-STATOR
DE EN

Torque sensors for production, automation, development and quality assurance
DE EN

The torque is detected by the torsion of the rotor using the strain gauge principle and transmitted optically without any contact. By dispensing with storage, the sensor is maintenance free, the signals are digitised directly on the shaft and made available by the stator as a voltage signal, frequency (RS422) and via USB. The direction of rotation is indicated by the potential of the output voltage; clockwise rotation corresponds to a positive output voltage, anti-clockwise rotation is negative.

The ringless design and extremely compact dimensions make the sensor easy to integrate. The flange dimensions are according to the DIN standard and are compatible with existing systems.

The rotor's characteristic data is automatically transmitted to the stator. This means that the rotor can be replaced quickly and easily if necessary.