8712, 8713 Potentiometric displacement transducers

For direct measurement of mechanical displacements, long durability, follower roll on request

Product Inquiry

    Product comparison

      • Features

        • Measurement ranges: 0 ... 10 mm to 0 ... 150 mm
        • Non-linearity up to 0.05 % F.S.
        • Durability 108 operations
        • Resolution 0.01 mm
        • Follower roll on request
        • Optional with internal spring
      • Product data

        Model 8712, 8713
        Principle Potentiometric
        Measuring range

        0 … 10 mm
        0 … 25 mm
        0 … 50 mm
        0 … 100 mm
        0 … 125 mm
        0 … 150 mm

        Signal output Depending on excitation voltage
        Protection class IP40
        Range of operating temperature -30 ... +100 °C
        Supply voltage Depending on measuring range
        Electrical connection

        8712
        5 pins plug connection

        8713
        Integrated connection cable 1 m
        Integrated connection cable 3 m
        Integrated connection cable 5 m

        Return spring

        Yes
        Yes, internal

        Specific characteristics

        • Service live: 108 movements
        • Resolution 0.01 mm
        • Follower roll on request
        • Optional with internal spring
      • Description

        These displacement sensors are potentiometric displacement sensors used for direct measurement, testing and monitoring of mechanical displacements. The spring-loaded control rod eliminates the need of coupling with the measurement object.

        A prerequisite for a very long life duration of the devices is a parallel alignment of the motion direction of the measurement object and the rod.

        Areas of application are:

        Displacement on

        • Electromagnets
        • Hydraulic cylinders
        • Switches and buttons

        Measurements of

        • Deformation
        • Bending
        • Press-fits
        • Feed strokes

        Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and a long-term stability.

        The rods are guided in long-life, low friction sliding bearings with close tolerances which provide high durability and measuring quality. The pre-stressed spring presses the sensor tip against the measurement object. This spring is double-guided and disappears in the probe head, if the rod is in its end position.

        The probe tip consists of a ball made of stainless steel. The bore at rod end serves for coupling retraction units. The rod is protected against twist for measurement ranges up to 50 mm. The probe tip (hexagonal) must not be turned by any tool, otherwise its anti-twist protection will be destroyed.

      • Data Sheet & Downloads

        Data sheet
        Further info
      • Accessories

        pdf Probe tips
      • Videos

        How to do: Attach force and displacement sensor to a hand lever press

        ForceMaster 9110 - Low-cost hand lever presses monitoring


        Youtube channel Burster Youtube Channel




      burster in Germany

      burster praezisionsmesstechnik gmbh & co kg
      +49 7224645-0
      infoburster.com
      www.burster.com

      Company-Information Company-Information

      Germany

      burster praezisionsmesstechnik gmbh & co kg

      Talstr. 1-5
      76593 Gernsbach
      Germany

      Fon: +49 7224645-0
      Fax: +49 7224645-88
      infoburster.com
      www.burster.com

      Trade fairs

      Motek
      05.10. - 08.10.21 - Stuttgart, 70269, Germany  

      The Battery Show
      30.11. - 02.12.21 - Stuttgart, 70269, Germany  

      ×
      © 2021 // burster präzisionsmesstechnik gmbh & co kg
      nach oben