Compact, small dimensions, accurate, low-priced, easy assembling into existing structures, for static and dynamic measurements, stainless steel
0 … 200 N
|Direction of force||Tension and compression|
|Signal output||1 mV/V|
|Load introduction button||Option|
|Range of operating temperature||-30 ... +80 °C|
The tension and compression load cell model 8435 enables universal and fast installation, requires hardly any installation space and upgrades with technical data that are readily achieved by larger sensors. Due to its excellent price-performance ratio with regard to its mechanical and electrical data, the force sensor finds its place in products that are also manufactured in larger quantities and calculated with a small budget.
This model of load cell uses proven strain gage technology to perform measurements. Strain gages are applied to the sensitive element and connected to form a full bridge. The electrical resistance of this full bridge increases with the load acting on it, so that the bridge supplies an output voltage proportional to the measurement variable. This model allows the force application of two kinds: compression via the load application button and tension via the centric internal thread.
The measurement range of 0 ... 5000 N is supplied exclusively with the integrated load application button. The sensor has to be mounted on a level surface using screws fitted through the three bore holes in the outer ring. To achieve the highest possible measurement accuracy, the sensor should not be subject to lateral forces. A strain-relief and an anti-bend mechanism for the connection cable are integrated in the sensor housing.
Example showing load cell fitted under pre-load with extreme overload protection
Fon: +49 7224645-0
Fax: +49 7224645-88